In general, when casting fishing, you must remove the fishing bite. It's inconvenient every time we cast.
This can stay on the fishing rod while casting. We can make it simple.
Prepare safety pins.
Choose the appropriate spring size according to the diametre of the guide tube.
Please refer to the marked angle.
Bend it at a similar angle with pliers tool.
Refer to 60 - 70 % of the length from the guide tube as indicated.
Use pliers tool to bend it at 60 - 70 angle.
If you need to make adjustments after fitting, modify the shape.
Cut off both sides about 3 mm from the guide ring.
From the guide ring, slightly bend both sides outward.
Separate it to check the state of being made.
Please use the fishing rod separately from the existing product.
Apply a super or epoxy glue if the bell doesn't hold the spring well.
When fishing at night, you can plug in a luminous tube and use it.
It never separates from the guide when casting. It is also easy to remove after fishing.
It is convenient to make several and keep them. Cost is only 50¢.