Various types of life rafts apparently news but we will focus our discussion
Langley on life rafts that conform with the soleus 96 amendment
blade of synthetic fighter with synthetic rubber or polyurethane life
rafts are kept airtight and watertight featuring good stability and comfort
ability they have a structure that which turns harsh environments
they are only holding that I've kept stored in an RP container like that
carried on drinkers our oil crew and favorite that some have a structure that
prevents the accumulation of static electricity don't for us accessories
include sea water battery lithium tree safety valve the chamber the inflation
gear
see uncle retroreflecting tape but boarding
these items have specific applications for specific contingency someone for
youth at an early stage during launching an initial drifting some are employed to
maintain the crude physical strength one trip while others are used to maintain
the life raft performance still others are transmitting distress signals all
life rafts conforming with so last night I six have instructions stickers on the
surfaces of their containers one of the most commonly used lifelines is the
proper time which is code on them the life raft could theta this point of the
cradle and is secured by a lecture wire for the automatic release device
lunch wraps conforming for solace 96 our of the weak link type act then the
painter is attached to the feeder connecting ring and automatic wire and
an operating wire are located at the faintest bit point the operating wire is
connected to the fainteth inside the contain some older types of liferaft
have a separate automatic wire or wire and painters and do not have a weekly
manual dropping of a life raft is possible by pulling the release handle
built into the cradle the automatic release device has an automatic
operating mechanism that is treated by water pressure it cannot be operated
learning some older types of life raft feature an automatic release device with
a manual jogging handle the cradle with a weak link has one end of the weekly
connected to the cradle and the other end over to the painter connecting ring
or directly to the painter
when a ship things tension is applied to the weak link and the link disconnects
separating my craft from the ship
in an emergency situation it is possible to manually initiate a gravity fall of
the container along the incline cradle hitless case the operating wiring cool
then the information of the life raft is triggered opening a container and
allowing the light raft to inflate automatically some units allow inflation
that discharge of the light rock by pulling the painter manually after
dropping the life raft container when the life raft is dropped manually the
ship and the life raft are moored to the painter and no tension is applied to the
weekly as such it is necessary to cut the paper after embarkation shook the
ship sink before life raft can be docked many hydraulic release equipment will be
activated at a water depth of between two and four meters the containers
buoyancy causes the automatic wire to be proved inflating and discharging the
life raft at the time of inflation the painter is disconnected from the ship
upon activation of the hydraulic release equipment the weak link is broken after
the pipe raft is inflated
the painter and one end of the week link are directly connected to the painter
connecting ring of a hydraulic release equivalent while the other end of the
weekly is secured to the ship the
operating wire is connected to the painter inside the container
the painter is directly connected to the painter connecting ring on the hydraulic
release equipment and the weak link connected at the midpoint on the painter
is secured to the crane if operating wire is connected to the automatic wire
inside the container the painter is directly connected to the painter
connecting ring of the hydraulic release equipments the automatic wire is also
directly but independently connected to the cradle
all of the following must be checked trying to drop loads of the lines
confirm that the light draft can fade it is not brushed with a rope or other bond
check that there is no feet obstructing the cradles ordinary rail rotating
better ensure that the painter is connected to the hydraulic release
equipment
check they confirm the connection of the weekly make sure that the safety pin is
attached to the cradle release time when boarding the life raft from the ship use
a ladder or boarding ramp when climbing aboard from the water use the boarding
ramp or a letter attached to the ride it is also possible to jump from a height
if not more than 4.5 meters or to the canopy pay attention to crew already in
the run do not board with tools cutlery or other objects that could damage the
loca
if the light raft should inflate in an inverted position climb on the co2
against them while taking hold of the writing rein on the bottom and apply
your weight to turn it over to its normal position one person can rightful
Oprah this operation is much easier if virtual
forces win this waves by you after boarding the rough is completed remove
the knife kept outside the canopy and cut the Pinta in such a way as to leave
about 5 meters of it attached to the light after separating the fainter
recover the sea hug that is idea the external co2 cylinder to avoid being
caught in the woeful caused by sinking with the parachute remove the puddle
from the accessory bag stick them out of the two openings and the boarding ramps
and throw the raft according to instructions provided maintain
sufficient distance from the ship to avoid being caught in the welcome only
now should the sea and can be redeployed as an auxiliary feature it is possible
to move the life rafts by dropping the seat anchor into the water and then
pulling the life raft towards the initial procedures are supporting the
light-brown are described in the manual instructions for immediate action and it
is strongly advised that these directions are followed
if the container is connected to the life raft and is floating use a knife to
sever the connection retroreflectivity which makes a search for both si and
they're easy it's attached to the surface of the lighter in addition to
this prevent signals radar reflector dye marker for the used during think time
etcetera all of which can be found in the accessory now let's see how to
launch a life of using the cottage Virginia under the tab it launched in
method the container of the lighter is lit display the damage and the damage is
turned to the light draft lowering position by pulling the automatic wire
the light raft inflates then the crew embarked while the life raft is
suspended above the deck using the habit the life raft isn't lowered brushes down
and is release the biggest advantage of the planet launching method is that it
makes it possible for the crew to evacuate the parent ship without getting
wet in normal situations the life raft container is stored on the deck cradle
the debit assisted launch procedure for a life raft it's the same as that for
film a spirit lowering and launching a possible for the operation of a winch
River
ships are of the liquid with supplementary variant drop type of
microphones when standard like boat supply trucks
are installed at distances from the bow or disturb for more than 100 meters
automatic release devices are not required for carrying drops and items
some of carry and drop type like rafts are equipped with an automatic relief
device but they are used in the same manner of life rafts without an
automatic Lily's device the life raft is carried to the dropping position where
the painter is secured to the ship and the light is dropped when the light rock
is installed on a cradle with an automatic release device set the painter
and the automatic one so that they do not hinder automatic flotation it is
essential that they are set according to the manual provided by manufacturers