tyler here with an amazing new product from fast cap this is the spade flush mount drill bit system
now what this is is it's a depth adjuster for your spade bits or your forstner bits or your
drill bits or any other kind of bit that you want to put in here super simple to use all you got to
do is take your bits put it in set it to about the right height you want there's a micro adjust
later so don't worry about getting it perfect and then start tightening one of the three set screws
to center the bit now we put three in here so you can center any bit within the hole and use it for
just about any bit that fits now it's a 3 8 hole so any bits that you have the shank diameter of
less than 3 8 of an inch are going to work for this once you tighten all three set screws and
get your bits centered now you can loosen this knob right here and spin the collar for a micro
adjust there's very fine threads in here that allow you to move the collar up very precisely
and get exactly the depth that you want so then you just lock that down
chuck it up into your drill and you're ready to go now you want to hold on to the top of
the collar up here that way that this collar doesn't spin and start marring or scratching
up your surface so hold on up high you don't want to get your fingers in these chip clearing holes
we made these really big so that the chips fly out and don't get bound up and caught up in the collar
so hold it up here away from the chip clearing holes and start your repeatable drilling
once you get down to the collar it's going to stop that bit from drilling now that's
your depth adjust another cool thing is since it's so wide it keeps your holes perpendicular
to the surface every time now i got three perfect holes that are the exact same depth
and i can do this across the job all day long no worries about having different depths
you're gonna love this product the new spade flush mount drill bit system from fast cap