How to make a recycled drinking glass from a bottle
First you will need some attractive bottles
Score around the bottle using the bottle cutter
Stick some blue tack along the score line
This is used to keep the hot and cold water on the score line and increases the cutting success rate
You are going to need to make a tool to attach your glass to a drill
This can be made from a round piece of wood cut with a hole saw
Now drill six holes in it for tie wraps to attach it to your glass
Thread a nut and bolt through the centre so you can attach it to your drill
It’s important to cover your glass with insulation tape to prevent it getting scratched
Use tie wraps to attach your glass to your drill adapter
Once all the tie wraps are tight make sure you cover it all with insulation tape
This bit is straight forward but make sure you do it on decent sandpaper and on a soft surface
This could take up to half an hour
Don’t forget to round off your edges
Use fine sand paper to get a nice finish