Hey it's me Destin welcome back to Smarter Every Day. So today I'm in California
and I have the great privilege of introducing the MAN...
Alan Sailer. - Hello - Alan Sailer is, if you don't know,
one of the best high speed photographers that currently does the art.
So I'm here in his garden, back behind his house, and we're going to
basically study explosions underwater with some firecrackers.
(Destin) You typically do it with the high speed photography method right? - Yeah it's just a
instant of detonation and I'm really looking forward to seeing
uh... time. - Yeah exactly it's not just one moment.
(Destin) This is a M320 Miro Phantom camera and
what do you hope to learn here? (Alan) I just want to be impressed, so uh..
do it. 3..2..1..0 [bang]
Alright! [laughs]
- Pretty cool. Let's look at the video.
[music]
- Oh yeah - Ripple. - Yeah.
OK so we decided we wanted a lower exposure time and
also a higher frame rate so what we're gonna do is we're gonna change the lens.
3..2..1..0.. [bang]
[falling debris] - about 20 feet... - Yep.
Man the uh.. I wonder if that was from impact or
if the bottle itself... - No it sucks in... There's cavitation appears on the top
if you looked at the photograph. -Yeah? Alright let's just look at the video.
Alright. I have a scientific mystery that I need your help
figuring out. Let's first define what an explosion is. Right?
So basically it's a rapid formation of gas and you have it contained in some type
of mechanical device and it increases pressure. And that mechanical
restraining device will eventually fail and blow outwards, correct?
But here's the question. After each shot I would go find the bottle
on the ground and the bottle would be sucked in on the top instead of blown
out like you would think. This is counter intuitive and we have to figure out why.
My theory is that as the bottle blows up on the bottom it begins to shoot up
like a rocket, and when it does this it starts to wrinkle like
grandma legs if you can see it, as it pushes the rest of the bottle forward.
Now the cap has more mass than the side walls of the bottle, so my theory
was that the bottle was pushing the cap, but the cap
weighs too much and so the bottle is out-running the cap. Alan on the other hand
disagreed with me. My position is that after detonation there's nothing but high pressure in the bottle,
but Alan referenced me back to some of his photos from his Flickr stream.
He always sees bubbles after detonation. Always. What causes
bubbles to form in a liquid? Of course. Cavitation.
A phase diagram is a fancy chart that uses pressure and temperature to describe what state
the matter should be in. We're located about right here which is 23 degrees
celcius. Now there's only a couple of ways we can go from liquid
over to vapor. One is we can move along the right here and increase the temperature
I don't think we're heating the water up enough in order to do that, so I would conclude
that Alan is correct. I believe we are lowering the pressure enough that we go beyond
this vapor boundary and turn into vapor. And all we have to do to turn it back into
a liquid is repressurize. OK let's look at the cavitation. Immediately after
detonation we're seeing bubbles all over the bottle. That's interesting but
150 microseconds later on the next frame, all the bubbles seem to be confined in one area.
Basically the shock waves are bouncing off the sides of the cylindrical bottle on the inside
and they're bouncing back toward each other and then they're interfering with each other and creating a
low pressure spot. I think that's pretty cool because you can already see the cap
beginning to suck in. On the next frame you can see what I call the "Wrinkly Grandma Leg Effect."
Now I think it's pretty interesting that the bubble is collapsing from the left to the right,
which might mean that's a compression wave going towards the front of the bottle,
but what's confusing to me is the cap of the bottle is still being sucked in.
So I convinced Alan to do a self-portrait with me but what I didn't realize is this self-portrait would
reveal more information than any of the other videos. At the point of detonation
clearly we have high pressure in the bottle. Then you can see the lid suck in
and then.. check that out. The lid shoots off.
So that implies to me that you have low pressure, and then high pressure.
Once the fluid is blown out of the bottom of that bottle, it begins to pull
fluid out of the top of the bottle with it. So we have an oscillation in pressure
Where have we seen something like that before? Sometimes when I'm drinking with a straw
I like to put my finger over the end of the straw and bring the fluid up out of the cup.
And then I'll release my finger and watch what the liquid does.
It oscillates. That's pretty cool and I think that's caused by fluid momentum
or the inertia of the fluid itself. So this momentum effect of fluid
applies to what we're doing too. As the fluid is blown out of the bottom of that bottle
you can see that it starts to pull liquid out of the top of the bottle and collapse the
side walls of the bottle. That's pretty cool too. So seriously,
thanks for your time. It's way more fun to think this through with you. Anyway, if you want the high speed footage
feel free to download it. Draw me some pictures and show me what you think the shock waves are doing on the video.
This guy did it. I don't think he's exactly right but he took a good stab at it.
I'm Destin. You're getting Smarter Every Day. Have a good one.
2..1..0.. [bang] By the way, Alan Sailer
grows very good apricots. The Russians have developed a way to use cavitation
to create a bubble on the front of the torpedo. This is called super cavitation.
If you fly the torpedo in that bubble you have way less drag
and you can move that torpedo way fast.
[ Captions by Andrew Jackson ] captionsbyandrew.wordpress.com
Captioning in different languages welcome. Please contact Destin if you can help.