friends, a huge hello to everyone, today we’ll work in such an epoxy resin, the simplest one is the
cheapest and I think everyone has it and everyone knows how to use it, but we’ll use it a little
differently today if it’s interesting, let’s go try to
make a good impregnation out of it today for a tree that will protect and well saturate the piece of wood itself
, this is an ordinary pine, we will try it on it, first we will make two identical samples the
same dosage, we all know it is nine to one in volume, that is, 9 resins,
I will draw one part of the hardener with a syringe, the resin is thick, of course, not so with a syringe - then quickly do it
in general, I scored 1 syringe, this is in one glass, now I’ll do the same dosage in the second glass,
I don’t need much, I’ll try on a piece of wood on a small one, now we collect the hardener itself,
now slowly mix everything
into the first glass, pour the most common acetone approximately 2 parts of what is here are
also well mixed, it turns out such a liquid substance now I
’ll take 2 identical pieces of wood, this is dry Arkhangelsk pine and we’ll
cover it with our composition, which we have diluted in acetone
, it absorbs very well
once I missed it, I’ll leave it to soak a little and then I’ll miss it again, but you
won’t smear it with a thick brush, I’ll smear it with an ordinary stick, lead already I’ve soaked in almost here,
I’ll apply the composition so boldly so that it’s honestly that I’m not cheating, but apparently the protection
will be one and the other, superficially, but inside I think that it will be better saturated with acetone, it
’s already soaked out, you can apply a second time here, I’m almost a whole glass well, all our liquid, but
such a small board, the consumption, that is, it turns out to be very large, but I’m just interested to see
the effect here, I’ll leave this piece of wood aside, let it dry until tomorrow
, you can already apply it a second time, because it has already been absorbed, that is as you can see, yes
, our resource is increasing and the amount of epoxy itself is increasing and the quality will of course
be perfect very different, but we'll see tomorrow, I'll apply three layers now and leave it to dry
for 24 hours, cut each piece, see how much it penetrated inside this and that resin
, but it is the same resin, only one with acetone is more liquid, yes, because it is straight liquid and thicker
which is natural as it should be, guys, as you can see, yes, I applied here in three layers, and here in
one layer what is the flow rate and how much is there, that is, practically nothing has changed
; the liquid is much more, I don’t know, you can’t see it such a process is going on, you can see it right before your eyes, yes, there’s
a big residue, let’s still cover the plywood, let’s see what will happen on the plywood
, plywood generally absorbs right before our eyes, since it’s already dry , I
apply the third layer, it absorbs it even on plywood and the fourth layer,
so friends 24 hours have passed, our scraps have dried up, as we see on plywood, everything has been directly absorbed
in some places, somewhere more somewhere less soaked here, completely absorbed, we
see yes it is very impregnated our piece of wood is also strong, mosquitoes have already been visited by night
inhabitants, the structure is smooth, shiny, everything has also dried up, and our simply undiluted
samples are glued together,
but it’s not clear how much they are here, you just see a layer of epoxy resin
here, though at the break you can see that the wood was well saturated, that’s how much
such a result is of course here no, it’s just superficial here,
that is, even here it doesn’t transmit to the camera like this, but it’s impregnated with almost 2 fibers
here, it’s visually visible on the scrap, even that the wood was well impregnated,
whatever one may say, the liquid solution is still better, but it can be seen very well, you can see like this here
on the break you can see on the fibers even yes that it is well impregnated on breaks with my eyes
I see that it was very well soaked with a liquid solution than usual, the usual
upper ones turned out to be upper protection also I think it will not be afraid of water at
all because it is impregnated with resin as you can see the water is not absorbed just going
well naturally where the epoxy was the effect is the same, but pov superficial, just like that, plywood
will no longer absorb water and is protected from this side, of course,
friends were immediately absorbed, well, we got a small issue with you, I wanted to try whether it is possible to dissolve epoxy resin with acetone
, of course it turned out that it can also be dried also with the same drying time as
ordinary resin not diluted that with acetone it’s a pity that it’s not transmitted to the camera how it absorbs
wood, you can check it and see for yourself that some
large detail is absorbed very well, you can process it with a brush, it will be well absorbed and there will be reliable protection if
you are interested in this topic, be sure to put like write a comment
and in the next video I will show how wood can be perfectly impregnated with vegetable oil
so watch the next releases do not forget to subscribe and like and comment on
this video, I wish you good health all the best, see you soon