Friends, a huge hello to everyone, we’ll work with the remnants of polystyrene Everyone likes videos
like this So let’s watch a video for you all Have a nice viewing Let’s go
for our video, we don’t need a lot of foam plastic, we’ll take a little cut into pieces
I think it will be enough, what sound will
we take now a plastic glass take xylene pour into a glass friends and we melt the foam,
see the reaction is going on. I don’t know who doesn’t go, many wrote for some reason that
apparently some kind of fake one doesn’t melt because you see how well the active reaction melts,
but it just dissolves a little; it dissolves well in acetone, then yes, look,
I’m now pouring less acetone at times, just a little bit, you see Yes, we have two pieces
, that is, it already dissolves so badly here, the reaction goes many times faster
, we fit Two pieces Straight in general straight with great speed
The only thing that turns out sticky in acetone mass is more glue it turns out
good glue here we have more liquid but it does not it’s more liquid, it’s just liquid
, it’ll be like paint for us, now I’m two more pieces of a homogeneous mass
polymer glue, insert the glue to the side, I took the usual paint in a metallic spray can
and make a couple of puffs
and mix
it up . This is such a life liquid, see the beauty
took the spray gun and now our liquid we’ll fill it in there and leave it a little
Oh, what a beautiful
one I’ve got a concrete floor, as you can see Now we’ll try to glue the square
connected to the compressor As you can see it’s all the same liquid now Let’s
try if xylene is applied with foam plastic on the floor
Well, look, it’s painted yes, that is, you can see the difference Well and we’ll also try to apply with a brush
, it’s just that it will be many times longer, and it’s possible to wear a brush
, it will dry up, we’ll check what the effect will be on the concrete field
, so leave it as you see the paint, I still have to experiment Let’s cover the cardboard
This is actually such a web flies when spraying
, that is, be sure to work in a mask, so let's also leave it to dry Well, the remnants of the glass were also
here, we ’ll
also take the cardboard
down, take a piece of wood, try to cover the wooden surface.
In general, we’ll also leave it, of course, we’ll try our adhesive composition.
pieces of plywood with you
Well, just like that, we’ll also try to glue drywall too,
drywall
will
also be glued together like this,
we’ll leave it all to dry for 24 hours So while
we ourselves were experimenting, everything has already dried up on the cardboard, the piece of wood has also dried up and the piece of
wood is still No more See, that is, in real time, I'm showing you Well,
let's leave it so that the piece of wood dries out so that we can check it all together so our friends have passed 24
hours Let's see how the glue of kathona behaved. As you can see, the cardboard is being torn off before your
eyes it’s just good inside, only the paper comes off now the special pieces of wood took
it somehow
right so we
’ll
pull it with a
clamp and see
what
kind of glue .
straight super That is, like glue I say it’s straight super Let’s try
how it will be water water just see it rolls down That is, even a small application
is carried out very well if here on concrete it just absorbs here no
here is the border here is going to what we have with cardboard
look guys cardboard it’s protected it doesn’t absorb anywhere, yes
, you can immediately see that everything has been absorbed here, you can wipe it off now Let’s just dry the cardboard
is protected
Well
, what can we say about the piece of wood on the pieces of wood, it also all rolls right
down . I liked it once again showed How you can use
the foam without throwing it away without clogging the environment when kind to do good things
to protect the same the same paper cardboard there I don’t know pieces of wood to protect
How to glue I hope you were interested If yes be sure to thumbs up write your opinion
Let's talk let's talk we wish you all good good health and see you again bye bye