BendPak mobile column lifts are the logical solution for heavy-duty lifting applications.
Whether your business tailors to buses, garbage trucks, military vehicles, semis, or other
heavy-duty vehicles, BendPak's PCL-18B series offers a safe, sophisticated, dependable investment.
Product development, assembly, testing and careful packaging of all PCL-18B lifts is
performed at our multiplex manufacturing facility in Santa Paula, California.
Available in sets of two, four, six or even eight, with a combined lifting capacity of
up to 144,000 pounds.
Each 18,000-lb. capacity column features independent, fully controllable consoles for built-operational
lifting functions.
Need more capacity?
Just add more columns.
With the push of a single button on any column, all connected lifts rise simultaneously, providing
an even, equalized elevation for all heavy-duty vehicle types.
Simple operating controls permit single, pair or team operation.
Selecting function settings is fast, convenient and easy.
Safety is paramount when servicing super-heavy-duty vehicles, which is why every BendPak mobiles
column lift is third party tested, gold label certified to meet ANSI, ALI and OSHA safety
requirements.
Independent safety locks and automatic parking ensure safe operation.
Convenient emergency shut-off switches on each column quickly cut power to the lift
in the event that an unsafe condition is detected by the operator.
Systematic dual-speed lowering modes are featured on the control panel: the rabbit setting permits
fast descent times and increased productivity, while the turtle setting offers a slower,
gentler descent that's perfect for placement onto BendPak's MLS-18 mobile support stands.
Proven low-pressure, direct-drive hydraulics minimize costly maintenance expenses and extend
the longevity of the lift.
Effective low-mounted power units lower the center of gravity, making the columns easier
to move and less likely to topples as opposed to screw drive systems with heavy motors and
drive systems.
The PCL-18 features an ergonomic steering control with built-in hydraulic jack that
elevate the column in seconds, reducing operator fatigue and downtime.
IT also features a 180-degree handle provides exceptional maneuverability, even in the most
compact areas.
Six-inch diameter Cush-Ride front wheels feature an active leaf spring suspension that designs
to provide maximum clearance over uneven surfaces such as thresholds, expansion seams or other
floor irregularities.
Easy-to-use, adjustable carriages allow the use of this lift on a variety of different
wheel sizes without specialty adapters.
Simply pull the pin, move the carriage to the desired position, put the locking pin
in place and you're good to go.
Intelligent horseshoe cabling guarantees column connectivity and eliminates lost signals or
system reboots.
Open loop configuration means no cables are ever driven over mitigating cable damage.
This also provides vehicle accessibility at the desired points of entry and exit.
Just to put it simply, a set of PCL-18 mobile column lifts will improve your shop efficiency
and let you service more heavier-duty vehicle types than ever before.