We should change the intro
"Hey guys!" I don't like it too much
Comment belo--
Comment below what you would like the new intro to be
Guys! Welcome to this new video, here we are with our buddy Flux
and today we'll be diagnosing and trying to repair an iPhone X
that was sent to me because it throws error 4013
so we'll be learning
come on Flux
we'll be learning how to diagnose this
I don't know why it happened
if we go here
they sent it without screws and without this flex
my finger is like this because I cut myself as always
they didn't send this flex from here
it's important always make a visual inspection
a visual inspection
to see what this phone looks like and see if we can find something
I see traces of...
Has anyone already opened this phone? No, it seems not
so, let's go to the microscope
and... no, I can't see anything
I don't see anything strange
absolutelly nothing, let's
disconnect some peripherals
to see if we find something
nothing
nothing strange
something very important you have to do when you have an iTunes error, no matter what it is
disconnect peripherals and update without peripherals
without peripherals, only Charge flex
and if you can
try with a different Charge flex
let's get a Charge flex
by the way, you already took a tour of my workshop, so you know where I'm going
I look for my tiny box where I have
Housing, Display and that stuff
and here I have a flex
I believe this is from iPhone X, yes it is
now I close my box in an orderly way
and put it back
now we can try a Housing in this phone
let's see here
let's connect this Charge flex like this, overhead
and let's bring the iPhone X cable and plug it here, turn on the iPower
connect the battery here
and now let's connect this cable
all the peripherals are disconnected
absolutely all
ok let's see, there I heard something
the computer recognized it, let's go to the PC
and open 3uTools
here it is, iPhone X
serial number is detected
click on "Go Flash"
click on "Quick Flash Mode" and let's
see if this gives any error
Switch View
11%, let's see where it is the error
ok, here we can learn a lot
here if we can see, it is updating, and it is doing so in the NAND
here it is already doing the update on the NAND
if it doesn't exceed that percentage
we could say that NAND is corrupted at some point, or
the NAND is poorly soldered, cracked, or the NAND just doesn't work
let's wait for this to move forward
is now overwriting it, let's see if it can go beyond 20%
let's see if this is can be restored or not
Remember we always give away 5 ZXW licenses?
in a previous video we already gave away one
we gave a code
in this video the code is going to be "Doggy face"
the emoji in the comments and the number
185
Doggy Face 185
to enter the ZXW raffle
leave your comment and participate
if you notice, the phone is almost finished
but, there's an error, the phone is not recognizing Baseband, I think it has a crack in the board
ok?
if you notice, they called the Baseband
and it couldn't find it, twice
let's check that
honestly, honestly
I'll upload these videos
sometimes I don't want to
because we are seeing that the phone turns on just by disconnecting a peripheral
this was due to a peripheral, I don't want to upload it
but I'm going to upload it, why? Because this is a lesson for us
Because this phone was send to me from a store
comes from people who repair
I'm not saying they're bad, I'm not
we simply must learn, we must know that
there are phones that we just have to disconnect the peripherals, a peripheral can give us some crazy faults
so we always have to learn something
now, this phone has a serious problem, it doesn't show IMEI
here we can see that it doesn't show IMEI
and if we go here we can see that it doesn-- oh it recognizes the Baseband
the only problem that this phone has is a crack, maybe
or a crack between layers
let's see in this camera
let's disconnect it
"Edgar, what flex is the problem?" I couldn't say
in a moment we'll see, now let's connect it's Charge flex
it could be the flex that is giving the problem
now let's turn it on with it's own Charge flex
oh I have disconnected the power button
I think the power button is this one
and now let's see what peripheral it was, there it is turning on
the phone is on, it has the display damaged, I already told t-- whoops
it turned off
it could be the Charge flex the culprit?
and that's why it gave error 4013?
let's see
it turned off
let's disconnect the power button
and connect the cable, it is on
I think it was the power button-- nope
turns on and off
let's disconnect the Charge flex
and turn it on just like this
let's see if we can find the problem
connect the power button
let's see if this turns off again
it didn't turned off
the Charge flex is damaged
the Charge flex is damaged and that's why it doesn't turn on
did you see how it turned off with the flex connected?
Now I want to do something that will take a few seconds
I'll look another Charge flex
Why? Because I think this is an iPhone XS flex
I think
doesn't have all the flex, so I can't know
but I'll look for a flex from iPhone X
so we can do this
Ok, here I find an iPhone X
that I know the flex is good
I'm going to connect it and see if it recognizes the IMEI
I want to see if it recognizes the IMEI, if it doesn't recognize it with this Charge flex
we'll have to desolder the boards and join them again
or test them with an iSocket to see if it is due to a board joint
here the phone, if we noticed
it turned on, the Charge flex of this phone is damaged
here it turned off
well, it restarted
I'll disconnect it
and connect this Charge flex
from this iPhone X
just to rule out the possibility of a problem with the Charge flex
that for this reason it does not show IMEI, I just want to rule out this possibility
let's
disconnect this and this
and plug the charger
let's see if the phone turns on or does something
nope, oh wait, silly me, I plugged it here and it was supposed to be plugged here
"EDGAR"
now it's turning on
let's go to the computer
and let's see if it detects it
many times a Charge flex can leave a phone without IMEI
trust me, I've seen everything
Told you
there is the phone with the IMEI
perfect, here is the IMEI
everything due to a Charge flex
due to a Charge flex, this is an XS
the other one is X
but because they both use the same flex, if we can say it
I was leaving it without IMEI
I just changed the Charge flex, why? Because
rule out the likelihood of any nonsense that might happen
I always say this to my students
now let's open iTunes and see if this asks for
iCloud or something
I always say to my students, discard peripherals
discard any peripherals, cuz we do not know what problem a damaged peripheral can give us
in this case, first, is giving us an error 4013
and second, it's leaving us a phone without IMEI with another Charge flex
I promise that I was about to separate the boards, but first I wanted to test a Charge flex
a different Chage flex, and make sure that this is not the problem
now let's connect it and see if iTunes asks for iCloud, to know that the phone is connected to Apple's servers
with that everything is fine and only needs to be assembled
here we connected it let's change camera, you can see it is connected
now let's see this in iTunes, it's trying to detect it
this phone will ask for IMEI or
iCloud, oh look, it doesn't have iCloud, nice
this is the serial number, we can corroborate it with the number we started this video with
to know that it's the same phone
Gentlemen
let's always learn from videos, easy videos like this one
that will help you earn an income today
this repair was very easy, a Charge flex that made everything go crazy
that can cause us to make mistakes, please do not make them
we have to learn, be wary of peripherals, because they can give us a hard time
it's time to say good bye, take care
don't forget to share this video, leave your like if you liked or if you don't, leave dislike
I care and love those who leave their dislike too
Take care and don't forget...
not, it was not like that
Take care and we'll see you in the next video
Bye!